Update PKGBUILD

With incremental recursion rsync only knows the total near the end, so the bar showed
no ETA for most of the backup. Save the file count as a third line of the state file
and use it as an estimate until rsync reports the real total.

PKGBUILD

@@ -4,7 +4,7 @@
 
 pkgname=simple_backup
 pkgdesc='Simple backup script that uses rsync to copy files'
-pkgver=4.6.0
+pkgver=4.6.3
 pkgrel=1
 url="https://git.shouldnt.work/fuxino/$pkgname"
 arch=('any')
@@ -24,7 +24,7 @@ checkdepends=('python-pytest'
 conflicts=('simple_backup-git')
 source=("git+$url?signed#tag=$pkgver")
 validpgpkeys=('7E12BC1FF3B6EDB2CD8053EB981A2B2A3BBF5514')
-sha256sums=('049c900b2d778434baa579409ccbb2b66ddb0968cf1dd23b3de0eda65ef3d2c6')
+sha256sums=('b1e7802fcd5e615c92f6007238b3699d69e3005e140d87a742283ef1cc6bd37f')
 
 build()
 {

README.md

@@ -14,6 +14,7 @@ simple_backup -h
 to print all possible command line options.
 
 ## Dependencies
+simple_backup requires Python 3.10 or later.
 The script uses rsync to actually run the backup, so you will have to install it on your system. For example on Arch Linux:
 
 ```bash
@@ -57,21 +58,28 @@ To back up files that your user can't read, run simple_backup with sudo or doas.
 In that case the user who ran the command is detected automatically, so that '~' (in the inputs and in the default configuration file path) refers to that user's home directory, not root's.
 When running as root in other ways (e.g. from a systemd service), specify the user with the --user (or -u) argument.
 
+## Progress
+When run in a terminal, simple_backup shows a progress bar with the percentage of files copied and an estimated time to completion.
+Disable it with --no-progress.
+
 ## Old backups
 The number of old backups to keep can be set with the --keep (or -k) argument (or in the configuration file).
-Old backups are only removed if rsync completes successfully, so that they are not deleted when the new backup may be incomplete.
+By default, old backups are only removed if rsync completes successfully, so that they are not deleted when the new backup may be incomplete.
 The only rsync error that is ignored is return code 24 (source files vanished during the transfer), which is common when backing up a live system.
+To free space on the destination first, use --remove-before-backup: old backups are then removed before rsync starts, even if the new backup fails.
 
 ## Last backup
 After each successful backup, simple_backup saves its time and directory to `~/.local/state/simple_backup/last_backup` (or `$XDG_STATE_HOME/simple_backup/last_backup`).
+It also saves the number of files, so that the next run can show progress and an estimated time while rsync is still looking for files.
 When run with sudo or doas, the file goes to the home directory of the user who ran the command.
-Print it with:
+To see when the last backup was made (e.g. `Last backup: 2026-10-25 14:03 (2 days ago)`), run:
 
 ```bash
 simple_backup --last-backup
 ```
 
-The file has two lines: the completion time in ISO 8601 format (e.g. `2026-10-25T14:03:12+02:00`) and the backup directory, so scripts (e.g. a status bar indicator) can easily read it to remind you when a backup is overdue.
+The first line of the file is the completion time in ISO 8601 format (e.g. `2026-10-25T14:03:12+02:00`), the second the backup directory, and the third (if known) the number of files.
+Scripts (e.g. a status bar indicator) can easily read the first line to remind you when a backup is overdue.
 
 ## Remote backup
 > **Warning**
@@ -101,4 +109,6 @@ sudo --preserve-env=SSH_AUTH_SOCK -s simple_backup [options]
 
 or by editing the sudoers file.
 If SSH key authentication is not available, password authentication will be used instead.
+In that case, if sshpass is installed, it is used to pass the password to rsync, so that you only have to enter it once; otherwise you will be asked for it more than once.
+sshpass has some security risks (see sshpass(1)), so use SSH key authentication if possible.
 Check the man page for more details.

man/simple_backup.1

@@ -1,31 +1,34 @@
-.TH SIMPLE_BACKUP 1 2026-11-02 SIMPLE_BACKUP 4.6.1
+.TH SIMPLE_BACKUP 1 2026-11-08 SIMPLE_BACKUP 4.6.3
 .SH NAME
 simple_backup \- Backup files and folders using rsync
 .SH SYNOPSIS
-.B simple_backup
-\-h, \-\-help
-.PD 0
-.P
-.PD
-.B simple_backup
-[\-c, \-\-config FILE]
-[\-i, \-\-input INPUT [INPUT...]]
-[\-o, \-\-output DIR]
-.PD 0
-.P
-.PD
-.RS 14 [\-e, \-\-exclude FILE|DIR|PATTERN [FILE|...]]
-[\-k, \-\-keep N]
-[\-\-ssh\-host HOSTNAME]
-[\-\-ssh\-user USERNAME]
-[\-\-keyfile FILE]
-.PD 0
-.P
-.PD
-[\-s, \-\-checksum]
-[\-z, \-\-compress]
+.SY simple_backup
+\-h,\~\-\-help
+.YS
+.SY simple_backup
+\-\-last\-backup
+[\-u,\~\-\-user\~USERNAME]
+.YS
+.SY simple_backup
+[\-v,\~\-\-verbose]
+[\-c,\~\-\-config\~FILE]
+[\-i,\~\-\-inputs\~INPUT\~[INPUT...]]
+[\-o,\~\-\-output\~DIR]
+[\-e,\~\-\-exclude\~FILE|DIR|PATTERN\~[FILE|...]]
+[\-k,\~\-\-keep\~N]
+[\-u,\~\-\-user\~USERNAME]
+[\-\-ssh\-host\~HOSTNAME]
+[\-\-ssh\-user\~USERNAME]
+[\-\-keyfile\~FILE]
+[\-\-remote\-sudo]
+[\-\-numeric\-ids]
+[\-s,\~\-\-checksum]
+[\-z,\~\-\-compress]
+[\-\-rsync\-options\~OPTION\~[OPTION...]]
 [\-\-remove\-before\-backup]
-.RE
+[\-\-no\-syslog]
+[\-\-no\-progress]
+.YS
 .SH DESCRIPTION
 .B simple_backup
 is a python script for performing backup of files and folders.
@@ -36,15 +39,20 @@ in a configuration file (default location $HOME/.config/simple_backup/simple_bac
 or directly on the command line.
 .P
 Parameters specified on the command line will override those in the configuration file.
+The exceptions are remote_sudo and numeric_ids: if enabled in the configuration file, they
+can\(aqt be disabled on the command line.
 .SH OPTIONS
 .TP
 .B \-h, \-\-help
 Print a short help message and exit.
 .TP
+.B \-v, \-\-verbose
+More verbose output.
+.TP
 .B \-c, \-\-config FILE
 Specify the configuration file, useful to specify a different one from the default.
 .TP
-.B \-i, \-\-input INPUT [INPUT...]
+.B \-i, \-\-inputs INPUT [INPUT...]
 Specify the files and directories to backup. Multiple inputs can be specified, just separate
 them with a space. If filenames or paths contain spaces, don't forget to escape them,
 or to use single or double quotes around them.
@@ -64,7 +72,7 @@ not preserved either.
 .TP
 .B \-e, \-\-exclude FILE|DIR|PATTERN [FILE|...]]
 Specify files, directories or patterns to exclude from the backup. Matching files and directories
-will not be copied. Multiple elements can be specified, in the same way as for the \-\-input option.
+will not be copied. Multiple elements can be specified, in the same way as for the \-\-inputs option.
 .TP
 .B \-k, \-\-keep N
 Specify how many old backups (so excluding the current one) will be kept. The default behavior
@@ -86,13 +94,13 @@ Username for connecting to the server in case of remote backup.
 .B \-\-keyfile FILE
 Location of the SSH key for server authentication.
 .TP
-.B \-s, \-\-checksums
+.B \-s, \-\-checksum
 Same as rsync option \(aq\-\-checksum\(aq, use checksums instead of mod\-time and size
 to skip files.
 .TP
 .B \-z, \-\-compress
 Compress data during transfer (rsync \(aq\-\-compress\(aq option). Useful for remote backup
-if saving bandwith is needed.
+if saving bandwidth is needed.
 .TP
 .B \-\-remove\-before\-backup
 Remove old backups (if necessary) before creating the new backup. Useful to free some space
@@ -108,8 +116,9 @@ Don't use systemd journal for logging.
 .B \-\-no\-progress
 Don't show a progress bar while rsync copies the files. The progress bar is only shown when
 the output is a terminal, so it never appears in the systemd journal or in redirected output.
-While rsync is still looking for files, the bar shows \(aq(scanning)\(aq, and the percentage
-and estimated time are only approximate.
+While rsync is still looking for files, the percentage and estimated time (marked with
+\(aq~\(aq) are based on the number of files in the last backup, or the bar shows
+\(aq(scanning)\(aq if that is unknown or already exceeded.
 .TP
 .B \-\-rsync\-options OPTIONS [OPTION...]
 By default, the following rsync options are used:
@@ -147,7 +156,8 @@ needs to be allowed to run without password in the same way.
 Use rsync \-\-numeric\-ids option. This causes rsync to use numeric uid/gid instead of trying to map uid/gid names from the local machine to the server.
 .TP
 .B \-\-last\-backup
-Print the date and directory of the last successful backup, then exit. The exit status is 0, or 1
+Print the date of the last successful backup and how long ago it was made (for example
+\(aqLast backup: 2026\-10\-25 14:03 (2 days ago)\(aq), then exit. The exit status is 0, or 1
 if no backup has been recorded yet or the state file can\(aqt be read (see
 .BR FILES ).
 .SH CONFIGURATION
@@ -227,7 +237,9 @@ Bad configuration file or options (for example, only one of SSH host and SSH use
 Written after each successful backup (local or remote), replacing the previous one. The first line
 is the completion time in ISO 8601 format with the UTC offset (for example
 \(aq2026\-10\-25T14:03:12+02:00\(aq), the second line the backup directory (prefixed with
-\(aquser@host:\(aq for remote backups). The default location is
+\(aquser@host:\(aq for remote backups), and the third line, if present, the number of files, used
+for the progress bar estimate (only counted when the progress bar is shown, otherwise the previous
+count is kept). The default location is
 \fI~/.local/state/simple_backup/last_backup\fR. When running as root with sudo, doas or \-\-user,
 the file is written to that user\(aqs \fI~/.local/state\fR and owned by them. Useful for scripts
 that remind you when a backup is overdue.

simple_backup/__init__.py

@@ -1,3 +1,3 @@
 """Init."""
 
-__version__ = '4.6.1'
+__version__ = '4.6.3'

simple_backup/simple_backup.conf

@@ -1,7 +1,7 @@
 # Example config file for simple_backup
 
 [backup]
-# Files and directories to backup. Multiple items can be separated using a comma (','). It is possible to use wildcards (i.e. '*' to match multiple characters and '~' for the user's home directory).
+# Files and directories to backup. Multiple items can be separated using a comma (','). It is possible to use wildcards (e.g. '*' to match multiple characters) and '~' for the user's home directory.
 inputs=/home/user
 
 # Output directory. For remote backups, this is a path on the server ('~' and relative paths refer to the home directory on the server).
@@ -13,7 +13,8 @@ exclude=*.bak
 # Number of old backups (i.e. excluding the one that's being created) to keep (use -1 to keep all)
 keep=-1
 
-# Uncomment the following section to enable backup to remote server through ssh
+# Uncomment the following section to enable backup to remote server through ssh.
+# ssh_host can be an alias from ~/.ssh/config (its HostName, Port and IdentityFile are used)
 # [server]
 # ssh_host=
 # ssh_user=

simple_backup/simple_backup.py

@@ -94,14 +94,27 @@ class MyFormatter(argparse.RawTextHelpFormatter, argparse.ArgumentDefaultsHelpFo
 class _ProgressBar:
     """Draws rsync --info=progress2 updates as a bar on stderr"""
 
-    def __init__(self) -> None:
+    def __init__(self, estimate: int = 0) -> None:
         self._start = default_timer()
         # rsync reports ir-chk while incremental recursion is still finding files
         self._scanning = True
         self._checked = 0
         self._total = 0
+        # Total files of the last backup, used until rsync knows the real total
+        self._estimate = estimate
         self._shown = False
 
+    @property
+    def total(self) -> int | None:
+        """Total number of files, once rsync has found them all"""
+
+        return None if self._scanning or self._total == 0 else self._total
+
+    def _eta(self, total: int) -> str:
+        eta = int((default_timer() - self._start) * (total - self._checked) / self._checked)
+
+        return f'{eta // 3600}:{eta // 60 % 60:02d}:{eta % 60:02d}'
+
     def update(self, record: str) -> bool:
         """Draw the bar if record is a progress update, and return whether it was"""
 
@@ -119,20 +132,29 @@ class _ProgressBar:
             self._checked = self._total - int(m.group(3))
 
         # Count files, not bytes: with --link-dest unchanged files are linked, and rsync's percentage leaves them out
-        if self._scanning or self._total == 0:
-            text = f'{self._checked:,} files checked  {size} copied  (scanning)'
-            percent = None
+        percent: int | None
+
+        if self.total is None:
+            # Estimate from the last backup, unless this one already has more files
+            if 0 < self._checked < self._estimate:
+                percent = self._checked * 100 // self._estimate
+                text = f'{f"~{percent}":>3}%  {self._checked:,}/~{self._estimate:,} files  {size} copied'
+
+                if percent > 0:
+                    text += f'  ETA ~{self._eta(self._estimate)}'
+            else:
+                text = f'{self._checked:,} files checked  {size} copied  (scanning)'
+                percent = None
         else:
             percent = self._checked * 100 // self._total
             text = f'{percent:3d}%  {self._checked:,}/{self._total:,} files  {size} copied'
 
             if 0 < percent < 100:
-                eta = int((default_timer() - self._start) * (self._total - self._checked) / self._checked)
-                text += f'  ETA {eta // 3600}:{eta // 60 % 60:02d}:{eta % 60:02d}'
+                text += f'  ETA {self._eta(self._total)}'
 
         width = get_terminal_size().columns - 1
 
-        # Fixed width, so the bar doesn't jump when the text changes length; no bar until the total is known
+        # Fixed width, so the bar doesn't jump when the text changes length; no bar without a total or estimate
         if percent is not None and len(text) + PROGRESS_BAR_WIDTH + 4 <= width:
             filled = PROGRESS_BAR_WIDTH * percent // 100
             text = f'[{"#" * filled}{"-" * (PROGRESS_BAR_WIDTH - filled)}]  {text}'
@@ -195,7 +217,7 @@ class Backup:
                  keep: int | None, options: str,
                  ssh_host: str | None = None, ssh_user: str | None = None, ssh_keyfile: str | None = None,
                  remote_sudo: bool = False, remove_before: bool = False, verbose: bool = False,
-                 progress: bool = False) -> None:
+                 progress: bool = False, file_estimate: int = 0) -> None:
         # Missing values are reported by check_params()
         self.inputs = inputs if inputs is not None else []
         self.output = output if output is not None else ''
@@ -209,6 +231,9 @@ class Backup:
         self._remove_before = remove_before
         self._verbose = verbose
         self._progress = progress
+        self._file_estimate = file_estimate
+        # Files in the backup, known only with the progress bar
+        self.file_count: int | None = None
         self._last_backup = ''
         self._server = ''
         self._output_dir = ''
@@ -768,7 +793,7 @@ class Backup:
 
         if self._progress:
             args.append('--info=progress2')
-            bar = _ProgressBar()
+            bar = _ProgressBar(self._file_estimate)
 
         with Popen(args, stdin=PIPE, stdout=PIPE, stderr=STDOUT, shell=False, env=env) as p:
             assert p.stdin is not None and isinstance(p.stdout, io.BufferedIOBase)
@@ -787,6 +812,9 @@ class Backup:
 
             returncode = p.wait()
 
+        if bar is not None:
+            self.file_count = bar.total
+
         if returncode == 0:
             # Without -v, only the summary, which may be fewer than two lines (e.g. with --rsync-options q)
             for r in output:
@@ -1105,12 +1133,28 @@ def _state_file(owner: pwd.struct_passwd | None) -> str:
     return os.path.join(base, 'simple_backup', 'last_backup')
 
 
-def _write_state(user: str | None, destination: str) -> None:
-    """Record the time and directory of the last successful backup (two lines)"""
+def _last_file_count(user: str | None) -> int:
+    """Files in the last backup (third line of the state file), or 0 if unknown"""
+
+    try:
+        with open(_state_file(_state_owner(user)), encoding='utf-8') as fp:
+            return int(fp.read().splitlines()[2])
+    except (OSError, ValueError, IndexError):
+        return 0
+
+
+def _write_state(user: str | None, destination: str, file_count: int | None = None) -> None:
+    """Record the time, directory and file count of the last successful backup (one per line)"""
 
     owner = _state_owner(user)
     path = _state_file(owner)
     tmp = ''
+
+    # Without the progress bar the count is unknown, so keep the previous one
+    if file_count is None:
+        file_count = _last_file_count(user)
+
+    count_line = f'{file_count}\n' if file_count > 0 else ''
     euid, egid = os.geteuid(), os.getegid()
 
     # Create the file (and any missing directories) as the user, not root
@@ -1125,7 +1169,7 @@ def _write_state(user: str | None, destination: str) -> None:
         fd, tmp = mkstemp(prefix='.last_backup', dir=os.path.dirname(path), text=True)
 
         with os.fdopen(fd, 'w', encoding='utf-8') as fp:
-            fp.write(f'{datetime.now().astimezone().isoformat(timespec="seconds")}\n{destination}\n')
+            fp.write(f'{datetime.now().astimezone().isoformat(timespec="seconds")}\n{destination}\n{count_line}')
 
         os.replace(tmp, path)
     except OSError as e:
@@ -1260,9 +1304,10 @@ def simple_backup() -> int:
     if args.numeric_ids or config_args['numeric_ids']:
         rsync_options.append('--numeric-ids')
 
+    progress = not args.no_progress and sys.stderr.isatty()
     backup = Backup(inputs, output, exclude, keep, ' '.join(rsync_options), ssh_host, ssh_user, ssh_keyfile,
                     remote_sudo, remove_before=args.remove_before_backup, verbose=args.verbose,
-                    progress=not args.no_progress and sys.stderr.isatty())
+                    progress=progress, file_estimate=_last_file_count(user) if progress else 0)
 
     try:
         return_code = backup.check_params(homedir)
@@ -1273,7 +1318,7 @@ def simple_backup() -> int:
         return_code = backup.run()
 
         if return_code == 0:
-            _write_state(user, backup.destination)
+            _write_state(user, backup.destination, backup.file_count)
 
         return return_code
     finally:

tests/test_cli.py

@@ -32,7 +32,8 @@ class FakeBackup:
     def __init__(self, inputs: Any, output: Any, exclude: Any, keep: Any, options: str,
                  ssh_host: str | None = None, ssh_user: str | None = None,
                  ssh_keyfile: str | None = None, remote_sudo: bool = False,
-                 remove_before: bool = False, verbose: bool = False, progress: bool = False) -> None:
+                 remove_before: bool = False, verbose: bool = False, progress: bool = False,
+                 file_estimate: int = 0) -> None:
         self.inputs = inputs
         self.output = output
         self.exclude = exclude
@@ -45,6 +46,8 @@ class FakeBackup:
         self.remove_before = remove_before
         self.verbose = verbose
         self.progress = progress
+        self.file_estimate = file_estimate
+        self.file_count: int | None = None
         self.homedir: str | None = None
         self.ran = False
         self.closed = False
@@ -87,7 +90,7 @@ def as_root(monkeypatch: pytest.MonkeyPatch) -> None:
 
     monkeypatch.setattr(os, 'geteuid', lambda: 0)
     # Writing the state file as root would call seteuid() (covered in test_state.py)
-    monkeypatch.setattr(sb, '_write_state', lambda user, destination: None)
+    monkeypatch.setattr(sb, '_write_state', lambda user, destination, file_count=None: None)
 
     for var in ['SUDO_USER', 'SUDO_UID', 'DOAS_USER']:
         monkeypatch.delenv(var, raising=False)
@@ -266,6 +269,17 @@ ssh_keyfile=/keys/id
         assert run_cli('-c', config('backup_dir=/backups'), *argv) == 0
         assert last_backup().progress is progress
 
+    @pytest.mark.parametrize('tty, estimate', [(True, 1234), (False, 0)])
+    def test_file_estimate(self, run_cli: RunCli, config: Callable[[str], str], monkeypatch: pytest.MonkeyPatch,
+                           tmp_path: Path, tty: bool, estimate: int) -> None:
+        monkeypatch.setattr(sb.sys.stderr, 'isatty', lambda: tty)
+        state = tmp_path / 'state' / 'simple_backup' / 'last_backup'
+        state.parent.mkdir(parents=True)
+        state.write_text('2026-10-25T10:00:00+02:00\n/backups/old\n1234\n')
+
+        assert run_cli('-c', config('backup_dir=/backups')) == 0
+        assert last_backup().file_estimate == estimate
+
     def test_check_params_failure(self, run_cli: RunCli, config: Callable[[str], str]) -> None:
         FakeBackup.check_code = 2
 

tests/test_local.py

@@ -207,6 +207,19 @@ class TestRsync:
         assert 'rsync: total size' in caplog.text
         assert '%' not in caplog.text
 
+    def test_file_count(self, src: Path, out: Path) -> None:
+        backup = make_backup(out, [str(src)], progress=True)
+
+        assert backup.run() == 0
+        # The source folder, its two files and the implied parent folders
+        assert backup.file_count is not None and backup.file_count >= 3
+
+    def test_no_file_count_without_progress(self, src: Path, out: Path) -> None:
+        backup = make_backup(out, [str(src)])
+
+        assert backup.run() == 0
+        assert backup.file_count is None
+
     def test_cli(self, src: Path, out: Path, tmp_path: Path, run_cli: Callable[..., int]) -> None:
         config_file = str(tmp_path / 'missing.conf')
 
@@ -280,6 +293,30 @@ class TestProgressBar:
         assert bar.update('          3.00M   2%    1.47MB/s    0:00:03')
         assert capsys.readouterr().err.endswith(']   50%  2/4 files  3.00M copied  ETA 0:00:30\033[K')
 
+    def test_estimate_while_scanning(self, monkeypatch: pytest.MonkeyPatch,
+                                     capsys: pytest.CaptureFixture[str]) -> None:
+        monkeypatch.setattr(sb, 'get_terminal_size', lambda: os.terminal_size((100, 24)))
+        bar = sb._ProgressBar(estimate=4000)
+
+        assert bar.update('          2.00M  25%    1.47MB/s    0:00:02 (xfr#1, ir-chk=1000/2000)')
+        assert bar.total is None
+        assert capsys.readouterr().err == \
+            '\r[#######-----------------------]  ~25%  1,000/~4,000 files  2.00M copied  ETA ~0:01:30\033[K'
+
+    def test_estimate_exceeded(self, capsys: pytest.CaptureFixture[str]) -> None:
+        bar = sb._ProgressBar(estimate=1000)
+
+        # More files than in the last backup: back to plain scanning
+        assert bar.update('          2.00M  25%    1.47MB/s    0:00:02 (xfr#1, ir-chk=500/2000)')
+        assert capsys.readouterr().err == '\r1,500 files checked  2.00M copied  (scanning)\033[K'
+
+    def test_real_total_replaces_estimate(self, capsys: pytest.CaptureFixture[str]) -> None:
+        bar = sb._ProgressBar(estimate=4000)
+
+        assert bar.update('      4,000,000   1%    2.97MB/s    0:00:01 (xfr#2, to-chk=1/4)')
+        assert bar.total == 4
+        assert '  75%  3/4 files' in capsys.readouterr().err
+
     def test_not_progress(self, capsys: pytest.CaptureFixture[str]) -> None:
         bar = sb._ProgressBar()
 

tests/test_state.py

@@ -49,6 +49,29 @@ def test_overwrite(state: Path) -> None:
     assert state.read_text().splitlines()[1] == DESTINATION
 
 
+def test_file_count(state: Path) -> None:
+    sb._write_state(None, DESTINATION, 1234)
+
+    assert state.read_text().splitlines()[2] == '1234'
+    assert sb._last_file_count(None) == 1234
+
+
+def test_file_count_kept_when_unknown(state: Path) -> None:
+    write_state(state, '2026-10-01T10:00:00+02:00\n/old\n1234\n')
+
+    sb._write_state(None, DESTINATION)
+
+    assert state.read_text().splitlines()[1:] == [DESTINATION, '1234']
+
+
+@pytest.mark.parametrize('text', [None, '2026-10-01T10:00:00+02:00\n/old\n', '2026-10-01T10:00:00+02:00\n/old\nx\n'])
+def test_no_file_count(state: Path, text: str | None) -> None:
+    if text is not None:
+        write_state(state, text)
+
+    assert sb._last_file_count(None) == 0
+
+
 def test_relative_xdg_state_home_ignored(monkeypatch: pytest.MonkeyPatch, tmp_path: Path) -> None:
     monkeypatch.setenv('XDG_STATE_HOME', 'relative')
     monkeypatch.setenv('HOME', str(tmp_path / 'home'))