Refresh after pacman transactions and local repo builds

Add a pacman hook that runs update-notify for each logged-in user with the timer active, and a path unit that users can point at their local repo databases to refresh after aur build.

PKGBUILD

@@ -3,11 +3,11 @@
 # Maintainer: Daniele Fucini <dfucini [at] gmail [dot] com>
 
 pkgname=update-notify
-pkgver=3.4
+pkgver=3.6
 pkgrel=1
 pkgdesc='Notify when updates are available'
 arch=('any')
-url="https://git.shouldnt.work/fuxino/${pkgname}"
+url="https://git.shouldnt.work/fuxino/$pkgname"
 license=('GPL-3.0-or-later')
 depends=('pacman-contrib'
          'libnotify')
@@ -15,15 +15,16 @@ makedepends=('git')
 optdepends=('aurutils: to check AUR packages in the local repo for updates'
             'fwupd: to check for firmware updates'
             'git-monitor: to check git repos for updates')
-source=("git+${url}?signed#tag=${pkgver}")
+source=("git+$url?signed#tag=$pkgver")
 validpgpkeys=('7E12BC1FF3B6EDB2CD8053EB981A2B2A3BBF5514')
-sha256sums=('12a68498d50871264f4a0ed082ff29a361676cf134c43520f98ee3f287e45509')
+sha256sums=('3efd5deadb6619b0fbc46d0559716feb117d095ce1068a02da53c3e14e88af68')
 
 package()
 {
-    cd "${srcdir}/${pkgname}"
+    cd "$srcdir"/"$pkgname"
-    install -Dm755 "${pkgname}" "${pkgdir}/usr/bin/${pkgname}"
+    install -Dm755 "$pkgname" "$pkgdir"/usr/bin/"$pkgname"
-    install -Dm644 "${pkgname}.service" "${pkgdir}/usr/lib/systemd/user/${pkgname}.service"
+    install -Dm644 "$pkgname".service "$pkgdir"/usr/lib/systemd/user/"$pkgname".service
-    install -Dm644 "${pkgname}.timer" "${pkgdir}/usr/lib/systemd/user/${pkgname}.timer"
+    install -Dm644 "$pkgname".timer "$pkgdir"/usr/lib/systemd/user/"$pkgname".timer
-    install -Dm644 README.md "${pkgdir}/usr/share/doc/${pkgname}/README.md"
+    install -Dm644 README.md "$pkgdir"/usr/share/doc/"$pkgname"/README.md
+    install -Dm644 config.example "$pkgdir"/usr/share/doc/"$pkgname"/config.example
 }

README.md

@@ -42,6 +42,28 @@ systemctl --user enable --now update-notify.timer
 
 The timer runs 5 minutes after boot, then every 6 hours.
 
+A pacman hook also runs update-notify after every pacman transaction, for each logged-in user whose timer is active, so the notification and the status bar file are current right after an upgrade.
+
+### Refresh after building packages
+
+Building into a local repository (`aur build`, `aur sync`) doesn't run pacman, so the hook can't catch it. To run update-notify whenever a repository changes, add the repository files to watch to `update-notify.path`:
+
+```
+systemctl --user edit update-notify.path
+```
+
+```
+[Path]
+PathChanged=/home/aur-local/aur-local.db.tar.gz.sig
+PathChanged=/home/custom-pkgs/custom-pkgs.db.tar.gz.sig
+```
+
+Watch the `.db.tar.gz.sig` file for signed repositories, or `.db.tar.gz` for unsigned ones (`.db` is a symlink). Then enable it:
+
+```
+systemctl --user enable --now update-notify.path
+```
+
 ## Usage
 
 ```
@@ -69,6 +91,19 @@ Kernel versions are compared without `pkgrel`, so a stock packaging-only update
 
 The content of the last notification is stored in `$XDG_STATE_HOME/update-notify` (default `~/.local/state/update-notify`). Delete it to get the current notification again.
 
+## Status bars
+
+Each run also writes the pending updates to `$XDG_STATE_HOME/update-notify/pending`, whether or not the threshold is reached, for status bars such as xmobar to read:
+
+```
+threshold 30
+repo <pkg> <newver>
+aur <pkg> <newver>
+kernel <custom-pkg> <stock-ver>
+```
+
+The file reflects the last run, which the pacman hook and `update-notify.path` keep close to current. To keep a bar current in between, drop entries whose installed version (`pacman -Q`) is no longer older than `newver`, or, for `kernel` lines, whose custom build has caught up with `stock-ver` (ignoring `pkgrel`). This only reads local data, so it's cheap to run often.
+
 ## License
 
 GPL-3.0-or-later. See [LICENSE](LICENSE).

update-notify

@@ -93,20 +93,22 @@ if [[ -n $checkupdates_out ]]; then
 fi
 arch_updates=${#arch_list[@]}
 
-aur_updates=0
+aur_list=()
 if command -v aur >/dev/null 2>&1; then
     if aur_out=$(aur repo -u -d "$AUR_REPO"); then
-        [[ -n $aur_out ]] && aur_updates=$(wc -l <<< "$aur_out")
+        [[ -n $aur_out ]] && mapfile -t aur_list <<< "$aur_out"
     else
         echo "aur repo -u failed, AUR updates not counted" >&2
     fi
 fi
+aur_updates=${#aur_list[@]}
 updates=$((arch_updates + aur_updates))
 
 # ---------------------------------------------------------------------------
 # Kernel check: the stock kernel updated, but your custom build didn't
 # ---------------------------------------------------------------------------
 kernel_lines=()
+kernel_pending=()
 for stock_pkg in "${!KERNELS[@]}"; do
     custom_pkg=${KERNELS[$stock_pkg]}
 
@@ -120,9 +122,28 @@ for stock_pkg in "${!KERNELS[@]}"; do
     # pkgrel is ignored: a stock packaging-only bump doesn't need a rebuild.
     if (( $(vercmp "${stock_ver%-*}" "${custom_ver%-*}") > 0 )); then
         kernel_lines+=("Rebuild $custom_pkg ($stock_pkg $stock_ver)")
+        kernel_pending+=("$custom_pkg $stock_ver")
     fi
 done
 
+# ---------------------------------------------------------------------------
+# Pending list for status bars, one "<source> <pkg> <newver>" per line
+# ---------------------------------------------------------------------------
+{
+    printf 'threshold %s\n' "$THRESHOLD"
+    for item in "${arch_list[@]}"; do
+        read -r pkg _ _ new <<< "$item"
+        printf 'repo %s %s\n' "$pkg" "$new"
+    done
+    for item in "${aur_list[@]}"; do
+        read -r pkg _ _ new <<< "$item"
+        printf 'aur %s %s\n' "$pkg" "$new"
+    done
+    for item in "${kernel_pending[@]}"; do
+        printf 'kernel %s\n' "$item"
+    done
+} > "$state_dir/pending.tmp" && mv "$state_dir/pending.tmp" "$state_dir/pending"  # readers never see a partial file
+
 # ---------------------------------------------------------------------------
 # Build a single notification
 #   - kernel rebuild lines are always included

update-notify-refresh

@@ -0,0 +1,10 @@
+#!/bin/bash
+# Run update-notify for every logged-in user whose timer is active (called by the pacman hook as root)
+systemctl list-units --plain --no-legend --state=running 'user@*.service' |
+while read -r unit _; do
+    uid=${unit#user@}
+    uid=${uid%.service}
+    user=$(id -nu "$uid") || continue
+    systemctl --user -M "$user@" is-active --quiet update-notify.timer || continue
+    systemctl --user -M "$user@" start --no-block update-notify.service
+done

update-notify.hook

@@ -0,0 +1,11 @@
+[Trigger]
+Operation = Install
+Operation = Upgrade
+Operation = Remove
+Type = Package
+Target = *
+
+[Action]
+Description = Refreshing update-notify...
+When = PostTransaction
+Exec = /usr/lib/update-notify/refresh

update-notify.path

@@ -0,0 +1,10 @@
+[Unit]
+Description=Run update-notify when a local repository changes
+
+# Add the repository files to watch with: systemctl --user edit update-notify.path
+# e.g. PathChanged=/home/aur-local/aur-local.db.tar.gz.sig
+[Path]
+Unit=update-notify.service
+
+[Install]
+WantedBy=default.target